'''SSL with SNI_-support for Python 2. Follow these instructions if you would
like to verify SSL certificates in Python 2. Note, the default libraries do
*not* do certificate checking; you need to do additional work to validate
certificates yourself.

This needs the following packages installed:

* pyOpenSSL (tested with 0.13)
* ndg-httpsclient (tested with 0.3.2)
* pyasn1 (tested with 0.1.6)

You can install them with the following command:

    pip install pyopenssl ndg-httpsclient pyasn1

To activate certificate checking, call
:func:`~urllib3.contrib.pyopenssl.inject_into_urllib3` from your Python code
before you begin making HTTP requests. This can be done in a ``sitecustomize``
module, or at any other time before your application begins using ``urllib3``,
like this::

    try:
        import urllib3.contrib.pyopenssl
        urllib3.contrib.pyopenssl.inject_into_urllib3()
    except ImportError:
        pass

Now you can use :mod:`urllib3` as you normally would, and it will support SNI
when the required modules are installed.

Activating this module also has the positive side effect of disabling SSL/TLS
encryption in Python 2 (see `CRIME attack`_).

If you want to configure the default list of supported cipher suites, you can
set the ``urllib3.contrib.pyopenssl.DEFAULT_SSL_CIPHER_LIST`` variable.

Module Variables
----------------

:var DEFAULT_SSL_CIPHER_LIST: The list of supported SSL/TLS cipher suites.
    Default: ``ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:
    ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS``

.. _sni: https://en.wikipedia.org/wiki/Server_Name_Indication
.. _crime attack: https://en.wikipedia.org/wiki/CRIME_(security_exploit)

'''

from ndg.httpsclient.ssl_peer_verification import SUBJ_ALT_NAME_SUPPORT
from ndg.httpsclient.subj_alt_name import SubjectAltName as BaseSubjectAltName
import OpenSSL.SSL
from pyasn1.codec.der import decoder as der_decoder
from pyasn1.type import univ, constraint
from socket import _fileobject, timeout
import ssl
import select
from cStringIO import StringIO

from .. import connection
from .. import util

__all__ = ['inject_into_urllib3', 'extract_from_urllib3']

# SNI only *really* works if we can read the subjectAltName of certificates.
HAS_SNI = SUBJ_ALT_NAME_SUPPORT

# Map from urllib3 to PyOpenSSL compatible parameter-values.
_openssl_versions = {
    ssl.PROTOCOL_SSLv23: OpenSSL.SSL.SSLv23_METHOD,
    ssl.PROTOCOL_SSLv3: OpenSSL.SSL.SSLv3_METHOD,
    ssl.PROTOCOL_TLSv1: OpenSSL.SSL.TLSv1_METHOD,
}
_openssl_verify = {
    ssl.CERT_NONE: OpenSSL.SSL.VERIFY_NONE,
    ssl.CERT_OPTIONAL: OpenSSL.SSL.VERIFY_PEER,
    ssl.CERT_REQUIRED: OpenSSL.SSL.VERIFY_PEER
                       + OpenSSL.SSL.VERIFY_FAIL_IF_NO_PEER_CERT,
}

# A secure default.
# Sources for more information on TLS ciphers:
#
# - https://wiki.mozilla.org/Security/Server_Side_TLS
# - https://www.ssllabs.com/projects/best-practices/index.html
# - https://hynek.me/articles/hardening-your-web-servers-ssl-ciphers/
#
# The general intent is:
# - Prefer cipher suites that offer perfect forward secrecy (DHE/ECDHE),
# - prefer ECDHE over DHE for better performance,
# - prefer any AES-GCM over any AES-CBC for better performance and security,
# - use 3DES as fallback which is secure but slow,
# - disable NULL authentication, MD5 MACs and DSS for security reasons.
DEFAULT_SSL_CIPHER_LIST = "ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:" + \
    "ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:" + \
    "!aNULL:!MD5:!DSS"


orig_util_HAS_SNI = util.HAS_SNI
orig_connection_ssl_wrap_socket = connection.ssl_wrap_socket


def inject_into_urllib3():
    'Monkey-patch urllib3 with PyOpenSSL-backed SSL-support.'

    connection.ssl_wrap_socket = ssl_wrap_socket
    util.HAS_SNI = HAS_SNI


def extract_from_urllib3():
    'Undo monkey-patching by :func:`inject_into_urllib3`.'

    connection.ssl_wrap_socket = orig_connection_ssl_wrap_socket
    util.HAS_SNI = orig_util_HAS_SNI


### Note: This is a slightly bug-fixed version of same from ndg-httpsclient.
class SubjectAltName(BaseSubjectAltName):
    '''ASN.1 implementation for subjectAltNames support'''

    # There is no limit to how many SAN certificates a certificate may have,
    #   however this needs to have some limit so we'll set an arbitrarily high
    #   limit.
    sizeSpec = univ.SequenceOf.sizeSpec + \
        constraint.ValueSizeConstraint(1, 1024)


### Note: This is a slightly bug-fixed version of same from ndg-httpsclient.
def get_subj_alt_name(peer_cert):
    # Search through extensions
    dns_name = []
    if not SUBJ_ALT_NAME_SUPPORT:
        return dns_name

    general_names = SubjectAltName()
    for i in range(peer_cert.get_extension_count()):
        ext = peer_cert.get_extension(i)
        ext_name = ext.get_short_name()
        if ext_name != 'subjectAltName':
            continue

        # PyOpenSSL returns extension data in ASN.1 encoded form
        ext_dat = ext.get_data()
        decoded_dat = der_decoder.decode(ext_dat,
                                         asn1Spec=general_names)

        for name in decoded_dat:
            if not isinstance(name, SubjectAltName):
                continue
            for entry in range(len(name)):
                component = name.getComponentByPosition(entry)
                if component.getName() != 'dNSName':
                    continue
                dns_name.append(str(component.getComponent()))

    return dns_name


class fileobject(_fileobject):

    def _wait_for_sock(self):
        rd, wd, ed = select.select([self._sock], [], [],
                                   self._sock.gettimeout())
        if not rd:
            raise timeout()


    def read(self, size=-1):
        # Use max, disallow tiny reads in a loop as they are very inefficient.
        # We never leave read() with any leftover data from a new recv() call
        # in our internal buffer.
        rbufsize = max(self._rbufsize, self.default_bufsize)
        # Our use of StringIO rather than lists of string objects returned by
        # recv() minimizes memory usage and fragmentation that occurs when
        # rbufsize is large compared to the typical return value of recv().
        buf = self._rbuf
        buf.seek(0, 2)  # seek end
        if size < 0:
            # Read until EOF
            self._rbuf = StringIO()  # reset _rbuf.  we consume it via buf.
            while True:
                try:
                    data = self._sock.recv(rbufsize)
                except OpenSSL.SSL.WantReadError:
                    self._wait_for_sock()
                    continue
                if not data:
                    break
                buf.write(data)
            return buf.getvalue()
        else:
            # Read until size bytes or EOF seen, whichever comes first
            buf_len = buf.tell()
            if buf_len >= size:
                # Already have size bytes in our buffer?  Extract and return.
                buf.seek(0)
                rv = buf.read(size)
                self._rbuf = StringIO()
                self._rbuf.write(buf.read())
                return rv

            self._rbuf = StringIO()  # reset _rbuf.  we consume it via buf.
            while True:
                left = size - buf_len
                # recv() will malloc the amount of memory given as its
                # parameter even though it often returns much less data
                # than that.  The returned data string is short lived
                # as we copy it into a StringIO and free it.  This avoids
                # fragmentation issues on many platforms.
                try:
                    data = self._sock.recv(left)
                except OpenSSL.SSL.WantReadError:
                    self._wait_for_sock()
                    continue
                if not data:
                    break
                n = len(data)
                if n == size and not buf_len:
                    # Shortcut.  Avoid buffer data copies when:
                    # - We have no data in our buffer.
                    # AND
                    # - Our call to recv returned exactly the
                    #   number of bytes we were asked to read.
                    return data
                if n == left:
                    buf.write(data)
                    del data  # explicit free
                    break
                assert n <= left, "recv(%d) returned %d bytes" % (left, n)
                buf.write(data)
                buf_len += n
                del data  # explicit free
                #assert buf_len == buf.tell()
            return buf.getvalue()

    def readline(self, size=-1):
        buf = self._rbuf
        buf.seek(0, 2)  # seek end
        if buf.tell() > 0:
            # check if we already have it in our buffer
            buf.seek(0)
            bline = buf.readline(size)
            if bline.endswith('\n') or len(bline) == size:
                self._rbuf = StringIO()
                self._rbuf.write(buf.read())
                return bline
            del bline
        if size < 0:
            # Read until \n or EOF, whichever comes first
            if self._rbufsize <= 1:
                # Speed up unbuffered case
                buf.seek(0)
                buffers = [buf.read()]
                self._rbuf = StringIO()  # reset _rbuf.  we consume it via buf.
                data = None
                recv = self._sock.recv
                while True:
                    try:
                        while data != "\n":
                            data = recv(1)
                            if not data:
                                break
                            buffers.append(data)
                    except OpenSSL.SSL.WantReadError:
                        self._wait_for_sock()
                        continue
                    break
                return "".join(buffers)

            buf.seek(0, 2)  # seek end
            self._rbuf = StringIO()  # reset _rbuf.  we consume it via buf.
            while True:
                try:
                    data = self._sock.recv(self._rbufsize)
                except OpenSSL.SSL.WantReadError:
                    self._wait_for_sock()
                    continue
                if not data:
                    break
                nl = data.find('\n')
                if nl >= 0:
                    nl += 1
                    buf.write(data[:nl])
                    self._rbuf.write(data[nl:])
                    del data
                    break
                buf.write(data)
            return buf.getvalue()
        else:
            # Read until size bytes or \n or EOF seen, whichever comes first
            buf.seek(0, 2)  # seek end
            buf_len = buf.tell()
            if buf_len >= size:
                buf.seek(0)
                rv = buf.read(size)
                self._rbuf = StringIO()
                self._rbuf.write(buf.read())
                return rv
            self._rbuf = StringIO()  # reset _rbuf.  we consume it via buf.
            while True:
                try:
                    data = self._sock.recv(self._rbufsize)
                except OpenSSL.SSL.WantReadError:
                    self._wait_for_sock()
                    continue
                if not data:
                    break
                left = size - buf_len
                # did we just receive a newline?
                nl = data.find('\n', 0, left)
                if nl >= 0:
                    nl += 1
                    # save the excess data to _rbuf
                    self._rbuf.write(data[nl:])
                    if buf_len:
                        buf.write(data[:nl])
                        break
                    else:
                        # Shortcut.  Avoid data copy through buf when returning
                        # a substring of our first recv().
                        return data[:nl]
                n = len(data)
                if n == size and not buf_len:
                    # Shortcut.  Avoid data copy through buf when
                    # returning exactly all of our first recv().
                    return data
                if n >= left:
                    buf.write(data[:left])
                    self._rbuf.write(data[left:])
                    break
                buf.write(data)
                buf_len += n
                #assert buf_len == buf.tell()
            return buf.getvalue()


class WrappedSocket(object):
    '''API-compatibility wrapper for Python OpenSSL's Connection-class.'''

    def __init__(self, connection, socket):
        self.connection = connection
        self.socket = socket

    def fileno(self):
        return self.socket.fileno()

    def makefile(self, mode, bufsize=-1):
        return fileobject(self.connection, mode, bufsize)

    def settimeout(self, timeout):
        return self.socket.settimeout(timeout)

    def sendall(self, data):
        return self.connection.sendall(data)

    def close(self):
        return self.connection.shutdown()

    def getpeercert(self, binary_form=False):
        x509 = self.connection.get_peer_certificate()

        if not x509:
            return x509

        if binary_form:
            return OpenSSL.crypto.dump_certificate(
                OpenSSL.crypto.FILETYPE_ASN1,
                x509)

        return {
            'subject': (
                (('commonName', x509.get_subject().CN),),
            ),
            'subjectAltName': [
                ('DNS', value)
                for value in get_subj_alt_name(x509)
            ]
        }


def _verify_callback(cnx, x509, err_no, err_depth, return_code):
    return err_no == 0


def ssl_wrap_socket(sock, keyfile=None, certfile=None, cert_reqs=None,
                    ca_certs=None, server_hostname=None,
                    ssl_version=None):
    ctx = OpenSSL.SSL.Context(_openssl_versions[ssl_version])
    if certfile:
        ctx.use_certificate_file(certfile)
    if keyfile:
        ctx.use_privatekey_file(keyfile)
    if cert_reqs != ssl.CERT_NONE:
        ctx.set_verify(_openssl_verify[cert_reqs], _verify_callback)
    if ca_certs:
        try:
            ctx.load_verify_locations(ca_certs, None)
        except OpenSSL.SSL.Error as e:
            raise ssl.SSLError('bad ca_certs: %r' % ca_certs, e)
    else:
        ctx.set_default_verify_paths()

    # Disable TLS compression to migitate CRIME attack (issue #309)
    OP_NO_COMPRESSION = 0x20000
    ctx.set_options(OP_NO_COMPRESSION)

    # Set list of supported ciphersuites.
    ctx.set_cipher_list(DEFAULT_SSL_CIPHER_LIST)

    cnx = OpenSSL.SSL.Connection(ctx, sock)
    cnx.set_tlsext_host_name(server_hostname)
    cnx.set_connect_state()
    while True:
        try:
            cnx.do_handshake()
        except OpenSSL.SSL.WantReadError:
            select.select([sock], [], [])
            continue
        except OpenSSL.SSL.Error as e:
            raise ssl.SSLError('bad handshake', e)
        break

    return WrappedSocket(cnx, sock)